Vol 18 No 1 (2012)

Published: 2012-02-08

Articles

  • Construction quality control of unbound layers based on stiffness modulus criteria

    Kamran Rafiei, Amir Kavussi, Shahaboddin Yasrobi
    Abstract 673 | PDF Downloads 625 | DOI https://doi.org/10.3846/13923730.2011.619328
    Page 5-13
    PDF

  • Review on waste management systems in the Hong Kong construction industry: use of spectral and bispectral methods

    Vivian W. Y. Tam, Khoa N. Le, S. X. Zeng
    Abstract 821 | PDF Downloads 745 | DOI https://doi.org/10.3846/13923730.2011.619326
    Page 14-23
    PDF

  • Serviceability analysis of flexural reinforced concrete members

    Gintaris Kaklauskas, Viktor Gribniak, Ronaldas Jakubovskis, Eugenijus Gudonis, Donatas Salys, Rimantas Kupliauskas
    Abstract 636 | PDF Downloads 514 | DOI https://doi.org/10.3846/13923730.2011.643553
    Page 24-29
    PDF

  • A model for solving structural, technological and safety problems

    Rita Liaudanskienė, Rūta Simanavičienė, Leonas Ustinovichius
    Abstract 636 | PDF Downloads 528 | DOI https://doi.org/10.3846/13923730.2011.643551
    Page 30-42
    PDF

  • Selection of wireless technology for tracking construction materials using a fuzzy decision model

    Shaohua Jiang, Won-Suk Jang, Mirosław J. Skibniewski
    Abstract 855 | PDF Downloads 716 | DOI https://doi.org/10.3846/13923730.2011.652157
    Page 43-59
    PDF

  • Acoustically assessed influence of air pore structure on failure of self-compacting concretes under compression

    Tomasz Gorzelańczyk
    Abstract 601 | PDF Downloads 528 | DOI https://doi.org/10.3846/13923730.2011.652982
    Page 60-70
    PDF

  • Architectural solutions to increase the energy efficiency of buildings

    Josifas Parasonis, Andrius Keizikas, Audronė Endriukaitytė, Diana Kalibatienė
    Abstract 1281 | PDF Downloads 1123 | DOI https://doi.org/10.3846/13923730.2011.652983
    Page 71-80
    PDF

  • Geometrically non-linear finite element reliability analysis of steel plane frames with initial imperfections

    Zdeněk Kala
    Abstract 947 | PDF Downloads 902 | DOI https://doi.org/10.3846/13923730.2012.655306
    Page 81-90
    PDF

  • Sustainability of mechanisation in the nigerian construction industry

    Godwin Iroroakpo Idoro
    Abstract 661 | PDF Downloads 768 | DOI https://doi.org/10.3846/13923730.2011.604541
    Page 91-105
    PDF

  • Vibration of a cracked cantilever beam under moving mass load

    Murat Reis, Yaşar Pala
    Abstract 754 | PDF Downloads 609 | DOI https://doi.org/10.3846/13923730.2011.619330
    Page 106-113
    PDF

  • Requirements definition and management practice to improve project outcomes

    Li-Ren Yang, Jieh-Haur Chen, Chung-Fah Huang
    Abstract 967 | PDF Downloads 987 | DOI https://doi.org/10.3846/13923730.2012.657340
    Page 114-124
    PDF

  • Relating flexible pavement acceptance criteria to performance using MEPDG simulations and piecewise cubic spline interpolation

    Anshu Manik, Karim Chatti, Kasthurirangan Gopalakrishnan
    Abstract 585 | PDF Downloads 492 | DOI https://doi.org/10.3846/13923730.2012.657342
    Page 125-132
    PDF

  • Enhancing construction interface management using multilevel interface matrix approach

    Fu-Cih Siao, Yu-Cheng Lin
    Abstract 1106 | PDF Downloads 1346 | DOI https://doi.org/10.3846/13923730.2012.657368
    Page 133-144
    PDF

  • The model of brittle matrix composites for distribution of steel fibres

    Wiesława Głodkowska, Janusz Kobaka
    Abstract 584 | PDF Downloads 486 | DOI https://doi.org/10.3846/13923730.2012.657405
    Page 145-150
    PDF